Seat Liners FAQsUpdated 7 days ago

1. Place the seat liner into the stroller seat.
2. Pull the shoulder harness straps through the openings in the seat liner.
3. Pull the buckle strap through the center opening at the bottom.
4. Attach the top toggles on the seat liner to the seat loops at the upper left and right corners of the seat.
5. Attach the lower toggles on the seat liner to the seat loops located just to the left and right of the pull strap.

Velcro Seat Liner Installation

For velcro-style liners — no harness re-threading required.

1. Detach the canopy (velcro) from the seat back.
2. Slide the bottom of the seat liner onto the adjustable footrest of the seat.
3. Use the velcro strip at the top of the seat liner to secure the liner to the seat back, then reattach the canopy to the velcro on the seat back.
4. Pull the bottom of the buckle through the lowest slit.
5. Feed the harness straps through the seat liner. There are 2 shoulder straps and 2 straps at the waist belt.

Original Seat Liner Installation

Requires re-threading the harness straps.

1. Start at the top and unthread the shoulder harness from the buckle.
2. Slide the bottom of the seat liner onto the adjustable footrest of the seat.
3. Pull the bottom of the buckle through the lowest slit.
4. Feed the harness straps through the seat liner. There are 2 shoulder straps and 2 straps at the waist belt.
5. Use the Velcro tabs at the top of the seat liner to secure the liner to the seat back.